A CMMC Level 2 assessment does not have to be a perfect score. Some gaps can be fixed after the assessment, but only on a plan of action and milestones, and only under tight rules. This guide explains what a POA&M is, what can and cannot go on one, and how the 180-day clock works.
What is a POA&M?
A plan of action and milestones (POA&M) is a document that lists each security requirement you have not yet met, the tasks needed to fix it, who is responsible and the dates for each step. In CMMC Level 2, a POA&M can earn Conditional status only if you score at least 80% and close every item within 180 days.
The POA&M is the companion to your system security plan (SSP). The SSP describes what is in place. The POA&M describes what is not, and how and when that will change. The two documents have to agree with each other and with your SPRS score.
When can you use a POA&M in CMMC Level 2?
The rules sit in 32 CFR 170.21. A POA&M is allowed only for requirements scored as not met, and only if all three of these are true:
- Score: your assessment score divided by the total number of Level 2 requirements is at least 0.8. With 110 requirements, that means at least 88 points.
- Point value: no requirement on the POA&M carries more than 1 point. The one exception is SC.L2-3.13.11 (encryption of CUI), which may be listed if encryption is used but is not FIPS-validated.
- Not excluded: none of the requirements in the table below are on it.
A Level 1 self-assessment never allows a POA&M.
Which requirements cannot go on a POA&M?
| Requirement | Topic |
|---|---|
| AC.L2-3.1.20 | External connections (CUI data) |
| AC.L2-3.1.22 | Control of public information (CUI data) |
| CA.L2-3.12.4 | System security plan |
| PE.L2-3.10.3 | Escort visitors (CUI data) |
| PE.L2-3.10.4 | Physical access logs (CUI data) |
| PE.L2-3.10.5 | Manage physical access (CUI data) |
Because most higher-value requirements are also barred, the practical rule is simple: the controls that matter most have to be met on assessment day, and the POA&M is for the small, low-value gaps. Our guide to the CMMC and NIST 800-171 requirements shows how the 110 requirements are grouped.
How the 180-day closeout works
If you pass with a POA&M, you receive Conditional CMMC status. The POA&M items must then be confirmed as closed by a POA&M closeout assessment within 180 days of the Conditional status date. That assessment covers only the requirements that were on the POA&M. If the items are not closed in time, the Conditional status expires.
- Level 2 self-assessment: your own organization performs the closeout, in the same way as the original self-assessment.
- Level 2 certification assessment: an authorized or accredited C3PAO performs it.
See the 90-day C3PAO assessment readiness guide for how POA&Ms and conditional status fit into the assessment timeline.
POA&M template outline
There is no single required format, but each item should carry enough detail for an assessor to see that the fix is real, owned and dated:
| Field | What to write |
|---|---|
| Requirement | The requirement ID and a short description, copied from your assessment |
| Finding | What is not met today and why |
| Tasks | The specific steps that will close the gap |
| Owner and resources | The named person responsible, plus budget, tools or staff needed |
| Milestones and dates | Interim steps with dates, and a final completion date inside the 180-day window |
| Status | Not started, in progress or complete |
| Closure evidence | What you will show the assessor when the item is done |
Common POA&M mistakes
- Listing excluded requirements. Putting the SSP or a physical-access control on the POA&M does not make the assessment pass.
- Missing the score threshold. Below 88 points, no POA&M is allowed at all.
- Vague dates. "Q2" is not a milestone. Each step needs a date inside the 180 days.
- No owner. An item without a named person does not get done.
- A POA&M that contradicts the SSP. Claiming a control is implemented in one document and open in the other undermines both.
For the full path from scoping to certification, read the CMMC 2.0 compliance guide.
Frequently asked questions
What does POA&M stand for?
POA&M stands for plan of action and milestones. It is a document that lists unmet security requirements, the tasks to fix them, who is responsible and the target dates.
Is a POA&M allowed at CMMC Level 1?
No. A Level 1 self-assessment never allows a POA&M. All Level 1 requirements must be met.
What score do you need to use a POA&M at Level 2?
You need a score of at least 80% of the Level 2 requirements, which is 88 out of 110 points. Below that, a POA&M cannot be used.
How long do you have to close a POA&M?
You have 180 days from the Conditional CMMC status date. A closeout assessment must confirm the items are closed, or the Conditional status expires.
Which requirements cannot be on a POA&M?
Six requirements are excluded: AC.L2-3.1.20, AC.L2-3.1.22, CA.L2-3.12.4 (the system security plan), PE.L2-3.10.3, PE.L2-3.10.4 and PE.L2-3.10.5. In addition, no requirement worth more than 1 point can be listed, apart from the FIPS-validated encryption requirement SC.L2-3.13.11.
Key takeaways
- A POA&M lists unmet requirements with tasks, owners and dates, and it is only available at Level 2.
- You need at least 88 of 110 points, and only low-value requirements qualify.
- Six requirements, including the SSP, can never go on a POA&M.
- Every item must be closed and confirmed within 180 days of Conditional status.

